The biggest advantage of the solid wood chair is the natural wood grain and the varied natural colors. Because solid wood is an organism that is constantly breathing, it is recommended to place it in a suitable temperature and humidity environment. At the same time, it is necessary to avoid placing beverages, chemicals or overheated objects on the surface to avoid damaging the natural color of the wooden surface. If it is a melamine board, when there is a lot of dirt, wipe it with a diluted neutral detergent and warm water first, then wipe it with water. Remember to wipe off the remaining water stains with a soft dry cloth. , And then use maintenance wax to polish, even if you are done, only by paying attention to daily cleaning and maintenance, can make wooden furniture lasting.
Maintenance and maintenance of solid wood dining chairs
1: Pay attention to the cleaning and maintenance of the dining table and chair surface. Use regular cotton dry soft cloth to gently wipe off the floating dust on the surface. Every once in a while, use a wet cotton thread that has been wrung out to clean the dust on the corners of the dining table and chairs, and then use a clean dry soft cotton cloth. wipe. Avoid removing stains with alcohol, gasoline, or other chemical solvents.
2: If there are stains on the surface of the dining table and chairs, do not rub them vigorously. You can use warm tea water to gently remove the stains. After the water evaporates, apply a little light wax to the original part, and then rub gently to form a protective film.
3: Avoid scratching hard objects. When cleaning, do not let the cleaning tools touch the dining table and chairs, usually pay attention, do not let hard metal products or other sharp objects hit the dining table and chairs to protect the surface from scratches.
4: Avoid humid environment. In summer, if the room is flooded, it is advisable to use thin rubber pads to separate the parts of the dining table and chairs from the ground, and at the same time keep the wall of the dining table and chair with a gap of 0.5-1 cm from the wall.
5: Keep away from heat sources. In winter, it is best to place the dining table and chairs at a distance of about 1 meter from the heating current to avoid long-term baking, which will cause local drying and cracking of the wood, deformation and deformation of the paint film.
6: Avoid direct sunlight. As far as possible, outdoor sunlight should not be exposed to the dining table and chairs in whole or in part for a long time, so it is best to place it in a place that can avoid the sunlight. In this way, the indoor lighting is not affected, and the indoor dining table and chairs are protected.